Installing the inner ring in the ball holder

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Inner Ring & Ball Holder

Courtesy of VOLVO CARS OF NORTH AMERICA.

Locate the markings to each other. Install a ball bearing.

NOTE: The location of the ball bearings.

Turn the inner ring and the ball bearing holder. Install the balls one by one in the same positions as before.