Drive shaft without visible snap ring. Tap off the constant velocity joint housing

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Brass Drift & Constant Velocity Joint Housing

Courtesy of VOLVO CARS OF NORTH AMERICA.

Use a brass drift.

NOTE: Only tap the inner ring. Take care not to damage the ball holder or outer ring.