LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2008 >> S40 T-5, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Wiper/Washer System - Cleaning, Inspection And Adjustment (644 Body)) >> Wiper/Washer System - Mechanical Checks And Adjustments (2000) >> Washer Nozzles Front, Adjusting >> Checking And Aligning the Washer Nozzles

Checking And Aligning the Washer Nozzles

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Washer Nozzle Adjustment Points
GLL115503Courtesy of VOLVO CARS OF NORTH AMERICA.

Check that the washers reach within the gray shaded area of the front windshield, and possibly within the square (white). (70 x 70 mm).

When adjusting. Adjust the point where the jets strike the front windshield, as shown.

Mark the points with a marker pen or a piece of tape as shown.

Adjust the washer nozzle with a small screwdriver (or a solid needle).

HINT: Do not damage the nozzle.