Adjusting headlamp alignment
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Adjust:
- the vertical light distribution (Y) using the 6 mm adjustment screw
- the horizontal light distribution (X) using the 6 mm adjustment screw.
HINT: Use a 6 mm drill bit.
NOTE:
headlamp beam adjustment must be carried out according to the relevant national statutory requirements.