LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2008 >> S40 T-5, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Supplemental Restraint System (SRS) - General Safety Information (644 Body)) >> Seat Belts And Other Retention Systems (2000-2004) >> Non-Triggered SRS Components, Destruction >> Seat Airbag (SIPS), Destruction >> Destruction of seat airbag (SIPS) >> Connecting cables to the seat airbag (SIPS)

Connecting cables to the seat airbag (SIPS)

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Adapter Cables Connected To The Seat Airbag
GLL139635Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the key from the discharge box and store so that it is inaccessible for unauthorized use.

Select the correct adapter cable for the airbag.

Connect the adapter cable to the airbag. Check that it is properly connected.

Check that the cable is not near the airbag.

WARNING: Remove all loose objects on, or directly connected to, the airbag.

Lay out the connection cable so that the user is 9 m from the airbag.

Connect the adapter cable to the connection cable and fully extend the leads.

Connect the cable to the discharge box.

Connect the discharge box to a fully charged 12 V battery.

scientia non olet · About LEMON Manuals