Installing the spoiler

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Spoiler

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the protective film.

Position the spoiler on the trunk lid so that (A) is the same on the right and left-hand sides.

Install the spoiler. Tighten the four nuts. Tighten to 5 Nm .

NOTE: Ensure that the nuts do not fall into the trunk lid.

Install the left and right rubber seals.

NOTE: After installing the spoiler, do not clean the car for 48 hours.