Instructions For Tracing Agent Injector

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: On newer filling/draining/vacuum pumping stations there is a reservoir for injecting oil. It can be used for filling with fluorescent tracing agent before filling with refrigerant and after vacuum pumping.

Fig 1: Drainage And Filling Valve With Injector And Hose

Courtesy of VOLVO CARS OF NORTH AMERICA.

The tracing agent injector is manufactured for use with the draining/recycling station.

The tracing agent injector has two threaded mounting holes to secure it to the draining/recycling station. Once connected, the injector is permanently attached.

To install the tracing agent injector, see Installing the Tracing Agent Injector .