Installing the Spacer Ring

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Pressing Intermediate Ring Into Place

Courtesy of VOLVO CARS OF NORTH AMERICA.

NOTE: Do not touch the inner runner section or the carbon section with your fingers.

Apply compressor oil on all mating surfaces in the spacer ring.
First install the spacer ring on special tool 9995604
Carefully position the tool and the spacer ring on the shaft. Do not turn it.
Press the spacer ring into place.