Fitting the Hose Between the Compressor And Condenser
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Always use new O-rings.
Fit:
- the pipe clip
- the hose
- the O-rings
Oil O-rings with AC compressor oil
Connect the pipe and tighten the bolts by hand.
Tighten:
- the bolt at the compressor to 22 Nm .
- the bolt at the condenser to 25 Nm .