Removing the Pulley
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of VOLVO CARS OF NORTH AMERICA.
- Remove the snap ring
- Install the puller
9995598
in position as close to the electromagnet as possible
- Install the bushing
9995599
in position on the compressor housing
- Pull the pulley wheel out of the housing.