Installing the Pulley
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of VOLVO CARS OF NORTH AMERICA.
- Position the pulley
- Carefully tap the pulley with a plastic hammer
- Install extractor:
9995598
and bushing
9995600
on the pulley and press the guide bushing into place
- Tighten the pulley
- Install the snap ring with the beveled side upwards.