Removing the Condenser
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Remove the upper support for the radiator (4x bolts).
Disconnect the pipe from the condenser. Plug the openings.
Remove the two mounting screws from the condenser.
Position radiator protection 9995474 between the condenser and the radiator on the right side (there is a risk that the radiator will be damaged by the support).
Lift up the radiator slightly and push it towards the cylinder block (press at the bottom of the radiator).
Lift the condenser. Remove it with a twisting movement.