Installing the Condenser

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Radiator Mounting Bolts With Torque Specifications

Courtesy of VOLVO CARS OF NORTH AMERICA.

Transfer the components (foam, rubber etc.) to the new condenser.

Position the condenser. Tighten to 10 Nm .

Secure the radiator at the support. Tighten to 10 Nm .

Remove the seals.

Lubricate the new O-rings with compressor oil.

Install the pipes. Tighten the pipes. Tighten to 25 Nm .