To abort a terminal crimping operation
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
The crimp tools have a ratchet in the grip section as shown.
- Use a screwdriver to lift and release the ratchet.
- Reposition the cable terminal correctly in the insert and proceed with Locate cable in the cable terminal .
If the cable terminal is damaged
If the cable terminal has already been deformed replace with a new cable terminal and start again from Place the cable terminal in the tool .