Miscellaneous, Exceptions

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Divided Cable Terminal

Courtesy of VOLVO CARS OF NORTH AMERICA.

The housings shown here have a divided cable terminal.

The cable terminals have no locking tab. The primary locking is located in the housing cavity on the cable side.

Fig 2: Identifying Pressed In Locking Catch

Courtesy of VOLVO CARS OF NORTH AMERICA.

Use a feeler gauge approx. 0.15 mm.

Press in locking catch and extract the cable terminal.

Proceed to New cable terminal and Seal SWS and plug . Replacing a cable terminal in order to crimp a new cable terminal.