Cable terminals without locking tab

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Receptacle Terminals

Courtesy of VOLVO CARS OF NORTH AMERICA.

Single terminal housings without a locking tab such as receptacle terminals.

The terminal removal tool is inserted from the cable side.

Use terminal removal tool p/n 9814229 .

Fig 2: Identifying Terminal Removal Tool Inserted Under Cable Terminal From Cable Side

Courtesy of VOLVO CARS OF NORTH AMERICA.

Insert the terminal removal tool under the cable terminal from the cable side.

The point of the terminal removal tool pushes in and releases the primary locking (locking catch) in the housing cavity.

Fig 3: Identifying Cable Terminal And Terminal Removal Tool

Courtesy of VOLVO CARS OF NORTH AMERICA.

Withdraw the cable terminal and terminal removal tool at the same time.

Proceed to New cable terminal and Seal SWS and plug . Replacing a cable terminal in order to crimp a new cable terminal.