Separate the connector pin and socket housings
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
If the connector is intact then first remove the socket housing (female) from the pin housing (male) as shown.
- Undo the locking screw. (Some connectors have no locking screw).
- Turn the connector housing retaining ring (outer ring) counterclockwise .
- Separate the two halves of the connector.