Removing the fuel pressure gauge
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the draining unit hose to the hose nipple on the door mirror (the black arrow in the graphic).
- Start the draining unit.
- Remove the tie strap locking the cock on the T-nipple.
- Set the cock in the central position. (position 2)
- Close the valve. (position 1)
- Disconnect adapter. Open the valve.
- Reinstall the protective cap.
- Remove the test equipment and hoses from the car.
- Reinstall the cover over the fuel rail.