Connecting the Fuel Pressure Gauge, continued

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Connecting Fuel Pressure Gauge (T-Valve Cock Toward Engine)

Courtesy of VOLVO CARS OF NORTH AMERICA.

Turn the T valve cock toward the engine (position 1 in graphic)
Stop the draining unit.

Fig 2: Identifying Drain Unit Hose Removal From T-Valve Hose Connector

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the draining unit hose from the T-valve hose connector.
Lock the cock with a tie strap. The cock must be pointing towards the engine.
Arrange the hose along the rubber trim on the plenum chamber cover to the left of the bonnet hinge. This is to prevent damage to both the bonnet and the hose.
Carefully close the hood.