Installing the control module
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Install:
- the control module (3)
- the connector (2).
Tighten the screw for the control module.
Tilt the seat back.
Install:
- the 4 screws for the seat. Tighten to 40 Nm
- the panels above the rear mountings for the seat.
- the panels above the front mountings for the seat.