Installing the seat cushion padding
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Install the heater pad. See Heater pad seat cushion .
Hook the padding into place at the front of the frame. Secure the padding to the rear of the frame.
Install:
- the tension springs at the rear edge
- the cable from the heater pad.
Pull the cable harness forward.
Install:
- the connector in the rail
- the connector to the cable harness.
Secure the cable harness to the frame. Use a tie strap.