Removing old heater pads
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Slide the backrest backwards.
Disconnect the connector from the cable harness.
Carefully heat the old heater pad to remove it.
CAUTION:
Ensure that the foam filling is not damaged when removing the heater pad. Ensure that the pad is detached from the foam filling. This is to avoid functionality problems when installing the new heater pad.
NOTE:
Damaged foam filling must be replaced. This to guarantee function. This also applies to damage due to cracks in the backrest and seat frame.