Fault-tracing information
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
HINT: After carrying out the repair, check that the fault has been remedied as follows:
- Ignition off.
- Reconnect the connectors, reinstall components etc.
- Start the engine.
- Activate the DSA warning lamp by clicking on the VCT 2000 symbol.
- Check that the warning lamp flashes at a frequency of 1.8 Hz.