Checking wiring and terminals

Check the wheel sensor and control module connectors for contact resistance and oxidation according to Contact resistance and oxidation .

Check the cable between the female half of the wheel sensor connector terminal 1 and the female half of the control module connector terminal:

7, the left front wheel.

5, the right front wheel.

9, the left rear wheel.

3, the right rear wheel.

for an intermittent short-circuit to supply voltage according to Short-circuit to supply voltage, intermittent faults .

Fig 1: Identifying 2-Pin Connector

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Fig 2: Identifying Ohmmeter

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Fig 3: Identifying Terminals

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Select "Continue" when the fault has been remedied. 

• Continue 

  Refer to Checking wheels and tires