Repairing short-circuits
- Ignition off
- Disconnect the breakout box.
Check the cable between wheel sensor female connector pin 1 and control module female connector pin:
7 (diagnostic trouble code (DTC) ABS-311), left front wheel.
5 (diagnostic trouble code (DTC) ABS-312), right front wheel.
9 (diagnostic trouble code (DTC) ABS-313), left rear wheel.
3 (diagnostic trouble code (DTC) ABS-314), right rear wheel.
for a short-circuit to supply voltage according to Short-circuit to supply voltage. Permanent faults .
- Continue
Refer to Verification
- Ignition off
- Disconnect the breakout box.
Check the cable between wheel sensor connector terminal 1 and control module female connector, pin:
7 (diagnostic trouble code (DTC) ABS-311), left front wheel.
5 (diagnostic trouble code (DTC) ABS-312), right front wheel.
9 (diagnostic trouble code (DTC) ABS-313), left rear wheel.
3 (diagnostic trouble code (DTC) ABS-314), right rear wheel.
for a short-circuit to ground according to Short-circuit to supply voltage. Permanent faults .
Select Continue when the fault has been remedied.
- Continue
Refer to Verification