Remedy the component
- The wheels and tires are different sizes.
Remedy so that all sizes are the same.
Select Continue when the fault has been remedied.
- Continue
Refer to Verification
- There is a fault in one or more of the wheel bearings.
Remedy the wheel bearings as necessary.
Select Continue when the fault has been remedied.
- Continue
Refer to Verification
- Poor braking power from one or more brakes.
Remedy these brakes as necessary.
Select Continue when the fault has been remedied.
- Continue
Refer to Verification
- One or more wheel sensor is loose or incorrectly installed.
Front wheel sensors and pulse wheels: Pull off the wheel sensor according to Front wheel sensor, replacement .
Replace the damaged wheel sensor according to Front wheel sensor, replacement .
Rear wheel sensors and pulse wheels: Pull off the wheel sensor according to Replacing the rear wheel sensors .
Replace the damaged wheel sensor according to Replacing the rear wheel sensors .
Select Continue when the fault has been remedied.
- Continue
Refer to Verification
- The pulse wheel and wheel sensor are not OK.
Remedy these as necessary.
Select Continue when the fault has been remedied.
- Continue
Refer to Verification