Checking wiring and terminals
Check the wheel sensor and control module connectors for contact resistance and oxidation according to Contact resistance and oxidation .
Check the cable between the female half of the wheel sensor connector terminal #1 and the female half of control module connector terminals:
7 (diagnostic trouble code (DTC) ABS-311), left front wheel.
5 (diagnostic trouble code (DTC) ABS-312), right front wheel.
9 (diagnostic trouble code (DTC) ABS-313), left rear wheel.
3 (diagnostic trouble code (DTC) ABS-314), right rear wheel.
check for an intermittent open-circuit according to Open-circuit, intermittent faults . Check for an intermittent short-circuit to supply voltage according to Short-circuit to supply voltage, intermittent faults .
Check the cable between the female half of the wheel sensor connector terminal 2 and the female half of control module connector terminals:
6 (diagnostic trouble code (DTC) ABS-311), left front wheel.
4 (diagnostic trouble code (DTC) ABS-312), right front wheel.
8 (diagnostic trouble code (DTC) ABS-313), left rear wheel.
1 (diagnostic trouble code (DTC) ABS-314), right rear wheel.
check for an intermittent open-circuit according to Open-circuit, intermittent faults .
Check the cable between the female half of the wheel sensor connector terminal 1 and 2 and the female half of control module connector terminals:
6 and 7 (diagnostic trouble code (DTC) ABS-311), left front wheel.
4 and 5 (diagnostic trouble code (DTC) ABS-312), right front wheel.
8 and 9 (diagnostic trouble code (DTC) ABS-313), left rear wheel.
1 and 3 (diagnostic trouble code (DTC) ABS-314), right rear wheel.
check for a short-circuit to each other according to Short-circuit to supply voltage, intermittent faults .
Select "Continue" when the fault has been remedied.
- Continue
Refer to Checking wheels and tires