Checking wiring and terminals

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Check the cable between engine control module (ECM) terminal #20 and DSA control module terminal #15. Check for an open-circuit according to Open-circuit, permanent faults .

Remedy as necessary.

Fig 1: Identifying DSA Control Module Terminals

GLL118762

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Ohmmeter

GLL101042

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 3: Identifying EMS2000

GLL111998

Courtesy of VOLVO CARS OF NORTH AMERICA.

Continue
Refer to Verification

Check the cable between engine control module (ECM) terminal #20 and DSA control module terminal #15. Check for a short-circuit to ground according to Short-circuit to ground, permanent faults . Check for a short-circuit to supply voltage according to Short-circuit to supply voltage. Permanent faults .

Remedy as necessary.

Fig 1: Identifying DSA Control Module Terminals

GLL118762

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Ohmmeter

GLL101042

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 3: Identifying EMS2000

GLL111998

Courtesy of VOLVO CARS OF NORTH AMERICA.

Continue
Refer to Verification