Volvo on-board diagnostic (OBD) system
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
With VIDA it is possible to:
- Read off and erase stored diagnostic trouble codes (DTCs)
- Reset adaptations
- Activate components and functions according to certain predetermined patterns
- Continuously monitor the value and status of the input and output signals for the system
- Read off the control module identification.
To activate the Volvo on-board diagnostic (OBD) system for DSA:
- The ignition must be on
- The battery voltage must be normal.