LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2008 >> S40 T-5, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Electronic Control Module (ECM) Diagnostic Trouble Codes - 2 Of 3 (644 Body)) >> ECM-7F: Malfunction Indicator Lamp. Signal Missing. Intermittent Fault (B4204T2 CVVT; 2000) >> Intermittent fault, signal missing >> Checking wiring

Checking wiring

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Check the signal cable between engine control module (ECM) terminal 34 and combined instrument panel terminal B23 for an intermittent open-circuit and remedy according to Open-circuit, intermittent faults .

If no fault can be found in the above fault-tracing try a new malfunction indicator lamp (MIL).

If that does not help, try a new combined instrument panel.

Other information 

Fig 1: Identifying EMS2000
GLL111998Courtesy of VOLVO CARS OF NORTH AMERICA.
Fig 2: Identifying Ohmmeter
GLL101042Courtesy of VOLVO CARS OF NORTH AMERICA.
Fig 3: Identifying Combined Instrument Panel Connector Terminals
GLL113127Courtesy of VOLVO CARS OF NORTH AMERICA.