Verification, continued

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Engine Start Verification

Courtesy of VOLVO CARS OF NORTH AMERICA.

Ignition off
Start the engine. Let it idle for approximately 1 minute in order to update the control module reference value for the camshaft position.
Read off diagnostic trouble codes (DTCs).

Check that the status of the diagnostic trouble code (DTC) has changed to intermittent. The fault has been remedied if the status of the diagnostic trouble code (DTC) has changed to intermittent.

Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA
Courtesy of VOLVO CARS OF NORTH AMERICA.

Is the status of the diagnostic trouble code (DTC) intermittent?

YES
VERIFIED: Troubleshooting has been completed.
NO
Refer to Information