Checking the connectors and camshaft adjustment
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition off
- Check the camshaft position (CMP) sensor and the control module connectors. Check for contact resistance and oxidation according to Contact resistance and oxidation
- Check the setting of the camshafts. See Camshaft seals, replacing
- Remedy as necessary.
Other information:
- To access the control module, see Engine control module (ECM), replacing
- To access the camshaft position (CMP) sensor connector, see Replacing camshaft position (CMP) sensor .
- Continue
Refer to Information