Diagnostic trouble code (DTC) information
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Condition
The engine control module (ECM) calculates the camshaft position in relation to the crankshaft using the camshaft position (CMP) sensor and engine speed (RPM) sensor signals. The control module adjusts the camshaft position using the reset valve. Diagnostic trouble code (DTC) ECM-5F is stored if the required change to the camshaft position takes too long.
Substitute Value
None.
Possible Source
- Low oil pressure in the engine
- Blocked oil ducts for the camshaft reset valve
- Defective camshaft reset valve.
Fault symptom[s]
- Malfunction indicator lamp (MIL) lit.