Signal too high. Permanent fault: Verification: Verification

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Engine Start Verification

Courtesy of VOLVO CARS OF NORTH AMERICA.

After carrying out the repair check that the fault has been remedied.
Restore components and connectors.
Start the engine. Allow the engine to idle.

Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA
Courtesy of VOLVO CARS OF NORTH AMERICA.
- Activate reading out of the engine temperature by clicking on the symbol for VCT2000.
- Check that the engine temperature is above 50 °C.

Go to Verifying, continued when the temperature is above 50 °C.