LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2008 >> S40 T-5, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Electronic Control Module (ECM) Diagnostic Trouble Codes - 2 Of 3 (644 Body)) >> ECM-5C: Canister Purge (Cp) Valve Signal. Signal Missing. Permanent Fault (B4204T3; 2004) >> Signal missing. Permanent fault >> Checking the signal cable

Checking the signal cable

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Check the cable between canister purge (CP) valve terminal #1 and engine control module (ECM) connector terminal #4. Check for an open-circuit according to Open-circuit, permanent faults .

Remedy as necessary.

Fig 1: Identifying Canister Purge (CP) Valve Terminals
GLL111977Courtesy of VOLVO CARS OF NORTH AMERICA.
Fig 2: Identifying Ohmmeter
GLL101042Courtesy of VOLVO CARS OF NORTH AMERICA.
Fig 3: Identifying EMS2000
GLL111998Courtesy of VOLVO CARS OF NORTH AMERICA.