LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2008 >> S40 T-5, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Electronic Control Module (ECM) Diagnostic Trouble Codes - 2 Of 3 (644 Body)) >> ECM-5C: Canister Purge (Cp) Valve Signal. Signal Missing. Permanent Fault (B4204T3; 2004) >> Signal missing. Permanent fault >> Checking the power cable

Checking the power cable

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Check the cable between canister purge (CP) valve terminal #2 and system relay base 2/14 terminal #5. Check for an open-circuit according to Open-circuit, permanent faults .

Remedy as necessary.

Fig 1: Identifying Canister Purge (CP) Valve Terminals
GLL111977Courtesy of VOLVO CARS OF NORTH AMERICA.
Fig 2: Identifying Ohmmeter
GLL101042Courtesy of VOLVO CARS OF NORTH AMERICA.
Fig 3: Identifying System Relay Base Terminals
GLL114196Courtesy of VOLVO CARS OF NORTH AMERICA.