Checking the terminal
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition off
- Disconnect the connector for the camshaft position (CMP) sensor.
Check the connector for the camshaft position (CMP) sensor for contact resistance and oxidation according to Contact resistance and oxidation .
Remedy as necessary.
Was a fault detected?
- YES
Refer to Verification
- NO
Refer to Checking the signal cable