Front wheel, installing

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Front Wheel

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the wheels. Tighten the nuts slightly.
Then tighten crosswise. Tighten to 110 Nm
Torque tighten the wheel nuts one more time.
Lower the car.

NOTE: When tightening using a pneumatic impact wrench, only use torque socket 9512834 .

NOTE: Tightening crosswise to the correct torque is important to prevent stresses in the brake disc.

Tighten the center nut (A). Tighten to 120 Nm +60° .