Drive shaft left-hand side, installing
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
- Clean the drive shaft and the splines
- Remove special tool 9995488 from the transmission.
- Remove the screw from the wheel spindle/spring strut.
- Insert the drive shaft into the transmission. Press the drive shaft in as far as it will go.
- Position the hub over the drive shaft splines. Install the nut
- Install the two screws on the wheel spindle/spring strut.