Removing the crankshaft timing gear pulley
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
- Use universal puller 9986187 and two of the vibration damper screws
- Tighten both the screws by hand to stop in the pulley.
- Install the puller so that the claws engage in the screws, not in the camshaft pulley.NOTE: Ensure that the tool claws do not damage the pulley teeth.