Removing components

Fig 1: Removing/Installing Timing Covers

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove: 

• the cover over the injector
• the cover over the throttle body (TB)
• the upper timing cover
• the cover over the ignition coils
• the front timing cover
• the throttle cable from the bracket for the throttle body (TB).

Fig 2: Removing Brake Servo's Vacuum Hose From Its Connection In Throttle Housing

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove: 

• the vacuum hose for the brake servo. Pull the hose while pressing the plastic ring down
• the turbocharger (TC) control valve from the air cleaner (ACL) housing
• the connector for the mass air flow (MAF) sensor
• the EVAP hose connection to the mass air flow (MAF) sensor hose
• the upper section of the air cleaner (ACL) housing and hose
• the pipe screw for the water-heated crankcase ventilation
• the auxiliaries belt.