LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2008 >> S40 T-5, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Engine And Engine Components - Removal And Installation (644 Body)) >> Replacing Components (B4204T2 CVVT; 2000) >> Replacing the cylinder head and gasket >> Installing the cylinder head >> Installing the intake pipe for the coolant pump

Installing the intake pipe for the coolant pump

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Install the inlet pipe for the coolant pump on the cylinder head. Use a new gasket.

NOTE: Apply thread sealant 116156 to the screw threads.
Fig 1: Installing Camshaft Covers
GLL113730Courtesy of VOLVO CARS OF NORTH AMERICA.

Install camshaft adjustment tool 9995452 at the rear of the camshafts. Check that the screws securing the adjustment tool to the camshafts and the screws holding the tool together are well tightened.

scientia non olet · About LEMON Manuals