Installing the lifting beam and lifting hook
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Remove the nut for the engine mounting.
Remove the metal bracket for the servo hose from the rotation protection for the auxiliaries belt.
Position lifting beam 9995006 slightly in front of the front lifting eyelet for the engine. Use lift arm 9995383 and lifting hook 9995460 to lift the front edge of the engine a few mm until the engine mounting screw can be taken out.