Install camshaft retaining ring

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Front Camshaft Seal

Courtesy of VOLVO CARS OF NORTH AMERICA.

Grease the new retaining ring
Install the ring by using special tool 9995718 at VVT side and 9995719 at other side.
Remove the tools and check proper fitting.

Install gear pulley, see Installing timing covers .
Install toothed belt, see Install timing belt at lower side .

Check for leakage.