Installing the lifting beam and lifting hook
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of VOLVO CARS OF NORTH AMERICA.
Remove the metal bracket for the servo hose from the rotation protection for the auxiliaries belt.
Position lifting beam
9995006
slightly in front of the front lifting eyelet for the engine. Use lifting arm
9995383
and lifting hook
9995460
to raise the front of the engine a few millimeters.