Installing the front engine mounting
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Install:
- the engine mounting. Position the hole against the front of the car
- the screws in the front-rear strut. Tighten to 35 Nm
- the screw and the nut in the engine mounting. Tighten to 55 Nm .