Removing the cover, the mounting and the connectors

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing Cover, Mounting And Connectors

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the connectors for:

the engine speed (RPM) sensor
the camshaft position (CMP) sensor
the knock sensor (KS)
the cable harness.

Remove:

the protective tube from the 3 clips
the brake servo hose from the power brake booster (press in the snap-ring and pull out the hose)
the hose from the valve for the air cleaner (ACL).