Inlet pipe, installing

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Inlet Pipe

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

inlet pipe. Use new gasket. Tightening torque 17 Nm .
vacuum hoses from inlet pipe acc. to marking.
crankcase ventilation's hose on camshaft cover.
connectors from air assistance valve and throttle position sensor.
oil dipstick tube.
upper radiator hose with thermostat housing's cover.