Inlet pipe, removing
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Remove:
- upper radiator hose with thermostat housing's cover.
- the screw holding the dip stick pipe to the intake manifold
- connectors from air assistance valve and throttle position sensor.
- crankcase ventilation's hose from camshaft cover.
- vacuum hoses from inlet pipe, mark up location.
- console between servo pump/inlet pipe.
- screws that hold inlet pipe to the cylinder head.
- the intake manifold