Gasket face, cleaning

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Cleaning Camshaft Cover

Courtesy of VOLVO CARS OF NORTH AMERICA.

Clean the gasket faces for:

the coolant bypass channel
the intake manifold
the cylinder block
camshaft cover.

When replacing/reworking of the cylinder head, clean the gasket faces for:

the manifold. Check that the studs are tightened
the thermostat housing

Blow the oil ducts clean.

CAUTION: Do not use a metal scraper. Use a soft putty scraper or gasket dissolver 1161440-1. The surfaces must be completely clean to seal tightly.

WARNING: Use a fume hood or extractor when using gasket solvent.